Nokia mobile vpn software download

Nokia Mobile VPN Client for N8 and other Symbian^3 products is published

VPN Client application will, at that point, handle the user authentication and set up the connection through the VPN gateway according to the security policy of the VPN access point. Once the authentication and connection setup has been completed successfully, all IP traffic through the VPN access point will be encrypted.

Applications that do not need VPN access can be used at the same time simply by configuring them to use ordinary Internet Access Points. This means that, for example, browsing and accessing email can be done through the enterprise network using VPN services at the same time as Multimedia Messaging and IM Chat communicate directly over GPRS with the servers of the network operator.

Note: This behavior is limited by the number of simultaneous PDP contexts that the network of the device supports, and also depends on the VPN policy configuration. Central management of security policies and updates over the air provide an uninterrupted service to mobile workers. Version 4. The format of the policy file is specified in [3]. The following table describes the most important terms and concepts used in this document. There are internet access points e.

To use a VPN connection in an application, a VPN access point will suffice instead of, for example, a packet-data access point. A CA certificate can be brought to the device from a file via the device user interface, or with a device management solution. Certificates must be in the DER-encoded X Client certificate 6 Client certificates are one of the supported client authentication methods of Nokia Mobile VPN client. October To use certificate based authentication, the device needs to have a key pair and a corresponding client certificate that is signed by a Certificate Authority that the VPN gateway trusts.

A client certificate can be brought to the device through the device user interface, together with the associated key pair, in a PKCS 12 file. User key store Device key store Private keys are stored either in a user key store or a device key store. When a private key that is stored in the user key store is used, the device authorizes the use of the key from the user by prompting for the user key store password.

The minimum length for the password is 6 characters. The device can use the keys stored in the device key store automatically, without prompting any passwords from the user. User key store password The user key store password protects the user key store. When a key stored in the user key store is used, the device prompts the user to enter the key store password. The user can set the password locally through the user interface on the device. VPN configuration file is a zip file with extension. This reduces several manual steps when setting up the VPN client via the device user interface, since the user does not need to import a CA certificate, private keys, and a VPN policy file separately.

The private key will be automatically placed either in the device key store or in the user key store, as required in the VPN policy. The policy file and command file formats are specified in [3]. VPN configuration file 4 4. The safety instructions in the user guides that accompany your device apply when using Nokia Mobile VPN client. A VPN configuration file, see Chapter 6 for more information.

We recommend though to use the configuration guides provided by the gateway vendor. Create VPN configuration file.

VPN Mobile Security for Java - Opera Mobile Store

This step can be skipped if your company has Nokia Security Services Manager used for device management. Install the configuration file to the Nokia device. If you have some other compatible Nokia device see chapter 2. If VPN is already installed in your device, you can upgrade to a newer version if desired. There are several ways to do it.


  • plants vs zombies apk android 4.
  • australia ios 7 release date.
  • Application description.
  • Nokia VPN – Setting-up Of Nokia VPN On Your Nokia Phone?
  • Description?
  • Document version 1.0?

The easiest way is to go to the web site mentioned above, select your device and click the file link and the installation starts. Install Mobile VPN client to device memory or a memory card by opening the file from the file manager or messages.

Program Details

Follow the instructions on screen. For all three installation detail dialogs shown in Figure 2, press Continue. Figure 2 Installation detail dialogs 5. For the first two options the first step is to create a configuration file. The policy file has filename extension. The simplest way to set up a VPN policy, certificates, and a private key via the user interface is to import them from a configuration file file extension.

If the device supports the device key store, and if the VPN policy denotes that the device key store shall be used, then the keys will be automatically placed in the device key store. Transfer the configuration file from PC to device The configuration file can be installed via the File Manager or from the messaging, if you send the file to the device over Bluetooth or Infrared.

After you have sent the file via Bluetooth or Infrared, it will appear in the messaging inbox. Open the file in the Inbox to install the contained VPN policy, certificates, and private key. Figure 5 shows how a configuration file can be seen in Inbox once it is moved there via Bluetooth. User can open given message and install policy as shown in Figure 6.

File Extensions and File Formats

Save the certificate and choose a label for it, as shown in Figure The label is an identifier that is used in the device user interface to refer to the certificate. This is illustrated in the following steps. Enter the password to open the file Figure Figure 12 PKCS 12 password query 3. The user key store is the default storage for new private keys.

Nokia Mobile VPN Client

When you import the first key to the device, the device asks you to select a password for the user key store Figure You will later need to enter this password to use the private key for VPN authentication, unless you move the key to the device key store. Figure 15 shows the final steps of saving the contents of a PKCS 12 file.

You can select a user interface label for the new client certificate. By default, the use of the new certificate and the associated private key requires the user to enter the key store password. This prompt will occur when the user is establishing a VPN connection. To avoid the password prompt, the certificate can be moved from the user store to the device store.

The certificate can be moved from the user store to the device store via Certificate management, which can be found in menu Settings — General — Security — Certificate management. To use the device store, your VPN policy must indicate that the device key store shall be used. You will need to enter the user key store password in order to unlock the private key. Figure 17 Moving certificate to device store 8. After you have moved the certificate to the device store, it disappears from the list of personal certificates.

Once the device has been associated with a device management server, the management of the settings can be made totally transparent to the user. Also in this case the VPN configuration file must be first created as described in chapter 6. The certificates are stored in the S60 certificate management so they will be available for other applications besides the mobile VPN client. The management server can specify which key store shall be used. Provisioning of a key pair and a client certificate in PKCS 12 format. Device management solution requests the device to generate a key pair and a certificate request in PKCS 10 format.

The device management solution receives the PKCS 10 file from the device and uses it to obtain a client certificate. The device management server then provisions the certificate to the device. For automated enrollment of client certificates, the device management server and the Certificate Authority CA need to be integrated. For more information, refer to the documentation of your device management solution. The settings PIN is a security code that the user receives from the administrator. When advanced device management is not being used, the user needs to accept all device management sessions, and confirm that an Internet connection can be used.

This is illustrated in Figure Figure 21 Receiving configuration data from device management server 3.

TrackBack URI. You are commenting using your WordPress.


  • Nokia XpressMusic & VPN | Blog?;
  • Use a secure VPN connection on your phone | Nokia phones?
  • Best Nokia VPN List.
  • Free antivirus protection that never quits.
  • android best bill reminder app.
  • pixlr express for nokia c7;
  • line windows phone cannot call.

You are commenting using your Google account. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email. Create a free website or blog at WordPress. Deutscher Text weiter unten. German text below. This was the best way to use the VPN client with the E Firmware version used: VPN-Client used: Wieso nicht?

Internet einrichten kann, wird dieser danach nie verwendet. Warum nicht? Sie erscheinen schlicht nicht in den Programmen selbst oder im Programm-Manager.